|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Single Slot Connector for PC Card Type III IC7 Series sFeatures 1. PC Card Standard compliant: Type I, type II and type III cards are covered. Terminals for grounding are provided. 2. Space saving and Lightweight Connector height is minimized to 5.4mm, and weight is 12.5g. 3. Eject mechanism Hirose's unique ejection mechanism provides an higher degree of card ejection over existing products. sProduct Specifications Current rating Rating Voltage rating 0.5 A 125V AC Operating temperature range -55c to +85c (Note 1) Storage temperature range -40c to +70c (Note 2) Operating humidity range Relative humidity 95% max. Storage humidity range Relative humidity 40% to 70% (No condensation) Item 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance 4.Vibration 5.Humidity (Steady state) 6.Temperature cycle 1000 M ohms min. No flashover or insulation breakdown 40 m ohms max. (Initial value) No electrical discontinuity of 100ns or more Insulation resistance: 100 M ohms min. No damage, cracks, or parts looseness Specification 500 V DC 500 V AC / 1 minute 1mA Frequency: 10 to 2000 Hz, full amplitude of 1.52 mm or acceleration of 147m/s2, 4 hours in each of the 3 directions 96 hours at temperature of 40c and humidity of 90% to 95% Temperature: -55c (c) +15c to +35c (c) +85c (c) +15c to +35c Time: 30 (c) 5 max. (c) 30 (c) 5 max. (Minutes) 5 cycles 10000 cycles at 400 to 600 cycles per hous Manual soldering: 300c for 3 seconds Conditions 7.Durability (insertion/ withdrawal) Contact resistance: 20 m ohms max. from initial value 8.Resistance to soldering heat No deformation of the insulator parts affecting performance Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Part Insulator Connector Eject Button Connector Terminals for grounding Eject metal fitting Locking pins Nuts Material PBT PA Brass Phosphor bronze Stainless steel Phosphor bronze Steel Finish Color: Black Color: Black Contact area: gold plating Lead area: Solder plating Gold plating ---------Solder plating Nickel plating Remarks UL94V-0 UL94V-0 ------------------------------------------------------- Contact A56 sOrdering Information IC7 - 68 PDR - 1.27 DS - EJR 1 2 3 4 5 6 1 2 3 Series Name : IC7 Number of contacts : 68 Board mounting type PD PDR : Standard : Reverse 4 5 6 Contact pitch : 1.27mm Board Mounting Type DS : Right angle Dip Ejector type No letter : Without Eject Button EJR EJL : Right Eject Button : Left Eject Button A57 BExamples of Connector Mounting Standard type qIC7-68PD-1.27DS-EJL qIC7-68PD-1.27DS-EJR Card tope surface Card tope surface Eject Button Card tope surface Card tope surface Eject Button Reverse type qIC7-68PDR-1.27DS-EJL qIC7-68PDR-1.27DS-EJR Card tope surface Card tope surface Card tope surface Card tope surface Eject Button Eject Button A58 sSingle Slot Connector qRight Eject Button qStandard type, Reverse type Standard IC7-68PD-1.27DS-EJR CL640-0401-0 Reverse 4 IC7-68PDR-1.27DS-EJR CL640-0402-2 Table 1 1 Contact No. 1, 17, 34, 35, 51, 68 36, 67 Other than above Contact Length 5.000.1 3.500.1 4.250.1 Note 1 The contacts length is indicated in Table 1. +0.1 2 The applicable range of indicated dimensions (54.2 -+0.1 , 3.5 - 0.05 ) are taken as 10mm from the bottom. 0.05 3 The terminal for grounding should be securely fasted from the bottom surface of the board using a screw (M20.4), flat washer and lock washer. 4 Pay attention to the Contact No. since the reverse type is marked "R". See the numbers in parentheses ( ) for the Contact No. of the reverse type. 5 The guide groove dimensions of the reverse type are left-right reversed. BPCB mounting pattern BExample of Screw Fastening (Recommendation) A59 sSingle Slot Connector qLeft Eject Button qStandard type, Reverse type Standard IC7-68PD-1.27DS-EJL CL640-0403-5 Reverse 4 IC7-68PDR-1.27DS-EJL CL640-0404-8 Table 1 1 Contact No. 1, 17, 34, 35, 51, 68 36, 67 Other than above Contact Length 5.000.1 3.500.1 4.250.1 Note 1 The contacts length is indicated in Table 1. +0.1 2 The applicable range of indicated dimensions (54.2 -+0.1 , 3.5 - 0.05 ) are taken as 10mm from the bottom. 0.05 3 The terminal for grounding should be securely fasted from the bottom surface of the board using a screw (M20.4), flat washer and lock washer. 4 Pay attention to the Contact No. since the reverse type is marked "R". See the numbers in parentheses ( ) for the Contact No. of the reverse type. 5 The guide groove dimensions of the reverse type are left-right reversed. BPCB mounting pattern BExample of Screw Fastening (Recommendation) A60 sSingle Slot Connector qWithout Eject Button qStandard type IC7-68PD-1.27DS CL640-0405-0 Table 1 1 Contact No. 1, 17, 34, 35, 51, 68 36, 67 Other than above Contact Length 5.000.1 3.500.1 4.250.1 Note 1 The contacts length is indicated in Table 1. +0.1 2 The applicable range of indicated dimensions (54.2 -+0.1 , 3.5 - 0.05 ) are taken as 10mm from the bottom. 0.05 3 The terminal for grounding should be securely fasted from the bottom surface of the board using a screw (M20.4), flat washer and lock washer. BPCB mounting pattern BExample of Screw Fastening (Recommendation) A61 |
Price & Availability of IC7-68PDR-127DS-EJR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |